5
BEFORE USE THE MACHINE
(2) Connect the body with engine, keep oil tank and four screws in
the same direction.
(3) Setting for two handles
As drawing, first loosen the four screws, fix two handles from two
direction, and then screw them down again.
(4) Installment of cutting attachment guard
Please look at the picture, fix the cutting attachment guard on the tail
of gear case, and then screw down the round screw. You must not use
the machine without installing the cutting attachment guard.
(5) As picture, fix blade shelve, use wrench L to fix the lower blade
shelve, and then fix the blade, upper blade shelve and upper dirt-proof
boot in turn. Finally, screw the hexagon nut counterclockwise.
a.
Read this owner’s manual carefully to understand how to
operate this unit properly.
b.
This product has been designed for use in cutting weed,
brush, small tress and similar vegetation. It should never
be used for any other purpose since doing so could result
in unforeseen accidents and injuries occurring.
c.
You should never use this brush cutter when under the
influence of alcohol, when suffering from drowsiness as
a result of having taken cold medicine, or at any other
time when a possibility exists that your judgment might
be impaired or that you might not be able to operate the
brush cutter properly and in a safe manner.
4
■
BEFORE UES THE MACHINE
a. Read this owner
’
s manual carefully to understand how to operate this unit properly.
b.
This product has been designed for use in cutting weed, brush, small tress and
similar vegetation. It should never be used for any other purpose since doing
so could result in unforeseen accidents and injuries occurring.
c.
You should never use this brush cutter when under the influence of alcohol,
when suffering from drowsiness as a result of having taken cold medicine, or
at any other time when a possibility exists that your judgment might be impaired
or that you might not be able to operate the brush cutter properly and in a safe
manner.
d.
Avoid running the engine indoors. The exhaust gases contain harmful carbon monoxide.
e.
Never use your brush cutter under circumstances like those described below:
1. When the ground is slippery or when other conditions exist which might make
it not possible to maintain a steady posture while using the brush cutter.
2. At night, at times of heavy fog or at any other times when your field of vision
might be limited and it would be difficult to gain a clear view of area.
3. During rain storms, during lightning storms. At times of strong or gale
–
force winds, or at any other times
when weather conditions might make it unsafe to use this product.
f. When using this product for the first time. Before beginning actual work. Then handling the brush cutter from
skilled worker.
g. Lack of sleep, tiredness or physical exhaustion results in lower attention spans, and this in turn leads to
accidents and injury. Limit the amount of time over which the brush cutter is to be used continuously to
somewhere around 30-40 minutes per session, and take 10-20 minutes of rest between work sessions. Also try
to keep the total amount of work performed in a single day under 2 hours or less.
h. Be sure to keep this manual handy so that you may refer to it later whenever any questions arise.
i. Always be sure to include this manual when selling, lending or otherwise transferring the ownership of this
product.
j. Never allow children or anyone unable to fully understand the directions given in this manual to use this brush
cutter.
■
WORKING GEAR AND CLOTHING
a.
When using your brush cutter, you should wear proper
clothing and protective equipment as follows.
(1)
Helmet
(2)
Protection goggles or face protector
(3)
Thick work gloves
(4)
Non-slip-sole work boots
(5)
Ear protectors (esp. for long-time operation)
b.
And you should carry with you things as follows.
1.
Attached tools and files
2.
Properly reserved fuel
3.
Spare blade
4.
Things to notify your working area (Rope, warning signs)
