12
(2) Push the engine stopping switch.
NOTE
If the engine doesn’t stop after stopping the switch, close the choke so that engine will stop after
a while.
CUTTING WORK
WARNING
•
Weather conditions and altitude may affect carburetor.
•
Do not allow anyone to stay close the brush cutter while working or adjusting the carburetor.
HOW TO USE
(1) Shoulder hang
As picture, hang it from left shoulder to right waist,
then start the engine, make sure that the gun switch
is at idle speed, connect harness interface with one of
the machine, keep the blade parallel with ground, and
arrange the length of harness to a suitable condition.
(2) Working methods:
A.
Sway brush cutter (from right to left)
B.
For generic grass, one time cutting quantity is half of the blade diameter; for strong ruderal,
one time cutting quantity is one third of the blade diameter..
C.
The place of gun switch is decided by the grass.
1. Use only as much throttle as it is needed to do the job. Excessive engine speed is
unnecessary.
2.
Avoid cutting branches which is too thick for the unit, as this will damage the life of drive
systems.
