Step 1:
Slowly turn the cartridges counterclockwise out of the housing.
Step 2:
Allow the gas to escape from the airbag by applying pressure to the individual
gas chambers.
Step 3:
Remove the protective cap, loosen the clamping screw and reset the piston
with a screwdriver or similar so that the recess in the piston is aligned with the
location of the locking sleeve in the centre of the release housing.
Step 4:
Re-insert the securing sleeve including the metal ball (attached to the release
belt) and hold it in this position while tightening the tensioning screw again.
Step 5:
Reattach the housing cap.
16
