Tail cap (A)
Unscrew tail cap
anti-clockwise to
change batteries
Main switch (B)
Battery : 2 x AAA - Alkaline or NiMH
Fitting batteries :
1. Make sure flashlight is off and unscrew the tail cap (A)
.
2. Remove old batteries and install new batteries in the correct polarity. Insert new batteries according to
the polarity indications (+) and (-) marked on the battery holder. Care to install the batteries as
described as failure to do this may cause damage to the flashlight.
3. Screw the tail cap back into place. The torch is now ready for use.
Operation :
Full pressing (B)
When light is On, half press (B) to adjust brightness
When light is On, leave for 5 seconds in chosen
output to lock setting
Press (B) when flashlight off
Light on (100%) ---> Light off
Light on (100%) ---> Light on (15%) (the cycle repeats)
Locks light output
The flashlight resets to high output when turned on again
Focusable
Head
Clip
USER MANUAL
PP16
