GoyaLab SAS
www.goyalab.com
Institut d’optique d’Aquitaine, rue François Mitterrand
- 33400 Talence
–
France
Version June 20
Material description
1
On/off switch
2
USB-C connector
3
BLE connection LED
4
Loading LED
5
Data transmission signal
6
Pin connection for additional modules
Before use
Before the first use, plug the USB-C power cord to a power supply and connect the other end to
IndiGo’s USB
-C connector (2). Once the power charge LED (4) is green, the IndiGo is ready to be used.
Note: if the IndiGo is off, all the LEDs will be off even if the IndiGo is in charge mode. To turn on the
LED during the charge mode battery, please turn on the switch (1).
Then, you will need to download the “GoyaLab” mobile app on the Google Play Store. The
iOS version will be available soon.
Maintenance
After each use, the IndiGo should be stored in its protective case to protect it from dust.
The IndiGo contains a 1000mAh LiPo battery. It is recommended to load the battery at least once every
6 months to prevent electrical damage.
2
1
5
4
3
6
