8
1. After the positioning sensor has been set, the words “SND ON” will appear on the screen. This
means that the voice function is on, press the power button to keep the voice function on. If
you wish to turn the voice function off, press “MEM” and the words “SND OFF” will appear on
the screen. Press the
to save the setting.
NOTE: If you turn the voice function on, the monitor will beep instead of speaking to you.
If you turned off the voice function and wish to turn it on, press and hold “SET” and it will take you
through the whole set up. Keep pressing “SET” until you get to the Voice function setting then press
“MEM” to turn it back on. Below the “SND ON” on the display is the volume level. After you turn the
voice function on, press “MEM” continually to turn up the volume, it can be set between levels 1 and 7,
then press the power button to save the setting.
SWITCHING USERS
This blood pressure monitor is for two users with a 90 memory recall for each.
1. After you have set up this blood pressure monitor, the monitor will be off. Press the “SET”
button and a user mark will appear. Press
to confirm the user and the
MEASUREMENT
g the wrist cu
ff
1. Remove all accessories (e.g. watch, bracelet) from your
wrist. If your physician has
diagnosed you with poor
n in your
arm, use your right wrist.
2. Roll or push up your sleeve to expose the skin.
SET
MEM
SET
MEM
Sound Symbol
Volume Level
Volume Level 7
Volume Level 0
Volume Level 1
Voice ON/OFF
SET
MEM
MEM
MEM
" "
" "
monitor will turn off.
