2 x
Govaerts Recycling NV | Kolmenstraat 1324 | B-3570 Alken | [email protected] | www.govaplast.com
2
Anchorage GP11 on a hard and flat surface
Anchorage is not necessarily needed on a school playground with
supervision.
The anchorage is done by fixing the nail plugs into the holes of the two
lower boards.
Position the bench on the desired place and mark the 2 anchorage
points. Then move the bench and drill the holes into the surface using a
drill bit of 8 mm. Put the bench on its place and fix the 2 nail plugs.
Because of the limited height in between the boards, it is
recommended to use an angle screwdriver.
Important suggestion
To drill the holes in the ground, use a sharp drill and just put the plastic
plug into the hole. It is better to screw the nail into the plug than to
hammer. This way, you don't damage the head of the nail and unfixing
will be easy.
