Gourmia JFP-300, User Manual

Page: 8 / 19

8
Filling the Water Tank
1. Plug in the unit. The water level indicator will light up.
2. Remove the water tank cap (A) by pulling it carefully.
3. Open the water tank by turning the plug (B) counter clockwise.
4. Fill the tank with the required water volume. (See function)
5. Close the water tank by turning the plug (B) clockwise from the
unlock icon to the lock icon.
6. Place the cap (A) a nd gently press the cap down.
MUL
TIFUNC
TION FOOD PROCESSOR
Installing the Blade
Note: Always use caution when
handling
the blades. They are very sharp.
Important: Even if you are steaming, the blades must always be installed.
1.
Hold the blade (
K
)
by the handle. Point the narrow end up.
2.
Place the ring (
L
) over the bottom of the blade as shown in
the picture below.
(The end that resembles a suction cup
will face away from the blade)
3.
P
lace the blade inside of the jar and push the narrow end
though the blade hole. Take the blade lock (M) and attach
it to the blade on the other side of the jar.
4. T
urn
the blade lock counterclockwise to secure the blade.
Important: Pull the blade
lock
(
M
) to confirm that the blade is properly screwed in.