8
FOR CUSTOMER SERVICE VISIT WWW.GOURMIA.COM OR CALL 888.552.0033
USING YOUR KETTLE
BEFORE USING FOR THE FIRST TIME
Remove any packaging, stickers, or accessories from both the inside and
outside of the kettle. Fill the kettle with clean water to the maximum line
and boil. Discard the water and repeat the process once.
USING Y
OUR KETTLE
1. Place the kettle on a stable, heat-resistant, and level surface.
2. With kettle unplugged, add the desired amount of water to the
kettle. Do not fill below the minimum line (0.2L) or above the
maximum line (0.8L). See figure 1.
3. Hold the Handle and cover the kettle with the Lid.
4. Plug the kettle into an outlet.
5. Turn the Power Knob to BOIL. The light on the Knob will turn on.
6. Once the water has boiled, the light will turn off. Turn the Power
Knob to OFF and unplug the kettle.
FIGURE 1
0.
8
L
0.2L
MAX
WARNING:
Never fill the kettle above the
maximum water line. Water may be ejected
from the spout and cause scalding.
Note:
If water level is too low when kettle
is turned on, it will automatically shut off.
Unplug the kettle and allow to cool down
for 5 to 10 minutes. Fill the kettle above the
minimum line before resuming normal use.
Never operate the kettle without water.
KEEP WARM MODE
After boiling water, you can turn the Power Knob to KEEP WARM. The
kettle will keep the water at 150 °F (65 °C).
When the Power Knob is closer to the BOIL position, the kettle will keep
the water at a higher temperature. When the Power Knob is closer to the
OFF position, the kettle will keep the water at a lower temperature.
After use, turn the Power Knob to OFF and unplug the kettle.
