9
USING Y
OUR
KET
TLE
FOR CUSTOMER SERVICE VISIT US @ GOURMIA.COM OR CALL 888.552.0033
BOIL WATER FUNCTION
1. Place the kettle on a stable, horizontal, heat-resistant, and level surface.
2. Add the desired amount of water to the kettle. Do not fill below the
minimum line (0.2L) or above the maximum line (0.6L). See figure 1.
3. Hold the Kettle Handle and cover the kettle with the Lid.
4. Plug the kettle into an outlet. The display will read “OFF.”
5. Tap the Power/Menu Button to turn on the kettle. The Indicator Light below
Boil Water, and the display, will blink. The kettle will begin boiling in 5
seconds.
Note: To switch between displaying temperature in Fahrenheit and Celsius, press
and hold the Temperature Button whie the water is boiling.
In Fahrenheit mode, the panel will display the temperature value with “°F” when
the temperature is lower than 100°F, such as 99°F, but the panel will only display
temperature value without “°F” when the temperature is higher or equal to 100°F,
such as “140.”
In Celsius mode, the panel will display the temperature value with “°C” when the
temperature is lower than 100°C.
BEFORE USING FOR THE FIRST TIME
Remove all of the various packaging, stickers, or accessories from both the inside
and outside of the kettle. Fill the kettle with clean water to maximum capacity
and boil. Discard the water and repeat the process.
USING YOUR KETTLE
Power/Menu
Button
0.6L
0.2L
FIGURE 1
