EN
16
5. Pull the mains plug out of the plug socket and remove the kettle from the base sta-
tion (
4
) so that you can pour the water carefully into an appropriate vessel. Keep the
lid (
9
) closed while you pour the water!
The kettle can be stored on the base station (
4
) when it is not being used. However, the
mains plug must be pulled out of the plug socket.
Cleaning and Care
ATTENTION!
■
Beware of burns!
Allow the device to cool completely before cleaning it.
■
Danger of electric shock from water!
Remove the mains plug from the mains sock-
et before cleaning the base station.
■
Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges to
clean the device. These can damage the surface.
• Wipe down the kettle on the outside (and If necessary the base station (
4
) too) with a
clean, damp cloth. Then wipe it dry.
• Keep the device ready to operate. You should regularly remove water limescale de-
posits with a descaling agent in accordance with the water quality in your area and
how often the device is used. Follow the instructions provided with the descaling
agent to descale the kettle.
Troubleshooting
If the device does not work properly, check whether you are able to rectify the problem
yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
Possible cause / solution
The device cannot be
switched on.
• Has
the
START
button been pressed?
• Is the plug inserted in the socket correctly?
• Is the socket defective? Try another plug socket.
• Check the fuse of the mains connection.
• Has the device overheated? Wait until it has cooled down,
pour in water and try again.
The device switches
off before the water
has boiled.
• Is the amount of water less than the
MIN
marking?
• Has a temperature of from 70 – 95°C been selected? Se-
lect 100°C.
The device does not
switch off.
• Has the keep-hot function been activated? Press the
START
button to switch off the device.
07956_DE-EN-FR-NL_A5_V1.indb 16
07956_DE-EN-FR-NL_A5_V1.indb 16
30.06.2017 13:44:55
30.06.2017 13:44:55
