17
EN
Before Initial Use
1. Remove any possible fi lms, stickers or transport protection from the device.
Never
remove the rating plate or any warnings!
2. Clean the accessories before you fi rst use them as they may have possible produc-
tion residues on them. To do this, follow the instructions in "Cleaning and Storage".
Setting Up the Device
PLEASE NOTE!
■
Make sure that the connecting cable is not squashed, bent or laid over sharp edges
and does not come into contact with hot surfaces.
■
The connecting cable should not hang down from the surface on which the device is
placed in order to prevent the device from being pulled down.
1. Place the device with suffi cient clear space above it and on all sides on a dry, fl at and
solid surface. Be aware that there must be suffi cient clear space above to allow the
mixer head (
11
) to be fl ipped up.
2. Make sure that the suction cups (
6
) stick to the surface correctly.
Inserting / Removing Accessories
PLEASE NOTE!
■
The device must be switched off when the tilting mixer head is being fl ipped up or
down.
■
Switch off the device and pull the mains plug out of the plug socket before changing
any attachments.
■
Make sure that the inserts are not mixed up for use. Only either the dough hooks or
the stirrers may be used at any one time.
Mixer head
Before inserting or removing any accessories, the mixer head (
11
) must be put up:
Press the release lever (
2
) with one hand and at the same time use your other hand to
fl ip up the mixer head.
To fl ip the mixer head down again, press the release lever again.
Mixing Bowl
Inserting:
Place the mixing bowl (
9
) on the turntable (
8
). Hold the turntable fi rmly and
rotate the mixing bowl as far as it will go anticlockwise (towards the
symbol).
Removing:
Hold the turntable fi rmly and twist the mixing bowl clockwise (towards the
symbol) until it is released.
