Before using your Candy Floss Maker for the
fi
rst time make sure that it is
thoroughly clean and dry. Please follow the cleaning instructions on page
6 of this user guide:
Candy Floss Maker features:
•
Splash
guard
•
Spinner
•
Heating
element
•
Bowl
•
On/O
ff
switch
•
Non-slip rubber feet
•
Paper
cones
Before using your Candy Floss Maker
Before using your Candy Floss Maker for the
fi
rst time make sure that you:
•
Remove the Candy Floss Maker from its packaging.
•
Completely unwind the mains cable.
•
Clean the plastic interior with a soft, damp cloth and then thoroughly dry.
•
Place the Candy Floss Maker on a dry, level heat-resistant surface away from
any other appliances or objects.
Your Candy Floss Maker is now ready to use.
Operating your Candy Floss Maker
1. Make sure that your Candy Floss Maker is clean and dry.
2. Position your Candy Floss Maker on a
fl
at surface or table close to a plug
socket and make sure that the non-slip rubber feet are secure on the
surface.
3. Plug the power lead into a suitable plug socket.
4. Switch the machine ‘On’ and wait for about 3 minutes for the spinner to heat
up to the correct temperature. Do not touch this part as it will get very hot.
5. Switch the machine ‘O
ff
’ after 3 minutes and wait for the spinner to stop
spinning.
6. Measure out one scoop of sugar using the measuring spoon included and
carefully pour into the centre of the spinner.
7.
REMEMBER
that the spinner becomes hot;
DO NOT
touch this with your
hands.
8. Switch ‘On’ the Candy Floss Maker, and after a few minutes you will be able
to see candy
fl
oss web being formed. In a quick motion move a paper cone
or wooden stick in a clockwise motion around the spinner; keep twisting
until a candy
fl
oss layer has formed around the cone or stick.
9. Once the
fi
rst layer has been formed, hold the cone or stick horizontally over
the machine. Keep twisting with your
fi
ngers.
5
Candy Floss Maker parts
Operating Instructions
4
Please refer to page 5 for instructions on operating your Retro Diner Candy
Floss Maker.
Product Speci
fi
cation:
Volts: 220-240V
Herts: 50-60Hz
Watts: 500W
(continued overleaf)
Splash guard
ss Maker.
Splash guard
On/ O
ff
Switch
Heating
element
Measuring
scoop
Spinner
Body
