7
Product warranty
Personnel requirements
All work on the product must be carried out by certified electricians and ITT
authorized mechanics.
ITT disclaims all responsibility for work done by untrained and unauthorized
personnel.
Modification and spare parts
Modifications or changes to the product/installation should only be carried out after
consulting with ITT. Original spare parts and accessories authorized by ITT are essential
for compliance. The use of other parts can invalidate any claims for warranty or
compensation and explosion-proof approvals.
Warranty claim
For warranty claim, contact your ITT Fluid Technology representative.
II. Transportation and Storage
Description
This section describes recommended methods for receiving, storing and handling the
pump prior to physical installation.
Receiving
The pump should be uncrated or unboxed when it is received so that it can be
completely inspected. Carefully check that everything is in good order. Make notes
of damaged or missing items on the receipt and freight bill. File any claims with the
transportation company as soon as possible.
Storage
Short Term: For storage of less than six months, the normal packaging procedures used
by Goulds Pumps are designed to protect the pump during shipping. After receipt, store
in a covered and dry location.
Long Term: For storage of more than six months, preservative treatment of bearings
and machined surfaces will be required. Rotate the pump and motor shaft several times
every three months. Refer to driver and coupling manufacturers for their long term
storage procedures. Store in a covered, dry location.
Handling
Warning: Pump and components are heavy. Failure to properly lift and support
equipment could result in serious physical injury or damage to pumps. Steel toed shoes
must be worn at all times.
Summary of Contents for GSP Series
Page 26: ...26 Notes ...
Page 27: ...27 Notes ...
