Figure B
Ground Cable
Ground Lug
PWR
DMD_IN
USB Port
Figure C
Loop Ground Cable to threaded post
here touching bare metal on bracket.
Nut
Washer
ColorDMD Bracket
1/4" Spacer (Included
with colorDMD)
Install one of the provided 1/4" Nylon spacers on each of the
four threaded studs. Position the ColorDMD face down on the
speaker panel (centered in the orientation shown in Fig. B).
Remove the protective film from the front side of the new
ColorDMD display.
Use the original DMD mounting hardware from Step 3 to fasten
the ColorDMD display to the speaker panel. See Fig. B for correct
stacking order of the hardware
.
5
6
7
STEP
STEP
STEP
!
WARNING
.
Electric Shock Hazard
- To protect against
accidental electric shock,
DO NOT
operate the game without
ensuring that the ColorDMD metal bracket is electrically grounded.
ALL RIGHTS RESERVED - US PATENT 8,773,452 B2 - COPYRIGHT 2021 - COLORDMD DISPLAYS LLC
STEP
8
Locate the included green ColorDMD ground cable and connect larger
ring end to the Ground Lug in the backbox (see Fig. B). Loop the other
end of the cable over the threaded stud nearest to the Ground Lug on
the bracket's bare metal area (see Fig. C).
