First Time Setup
English, Revision 01, Date: 27.01.2014
8
2
First Time Setup
To set up the HG 76342-A it has to be connected with a patch cable to the Ethernet
interface of a computer. After applying power, the green “Link LED“ on the RJ45 con-
nector shines when a link is detected. The yellow “100 MBit” LED indicates a 100 MBit
connection.
The “Port 1 or 2” LED on the front panel shines green when a connection has been
established via the Ethernet. The “WLAN” LED on the front panel will be blinking red
because usually no suitable WLAN is recognized.
2.1
Montage
Das Gehäuse steht in zwei Varianten zur Verfügung, einmal in einem Hutschienenge-
häuse und einmal in einem Flanschgehäuse. Im Folgenden finden Sie Gehäusezeich-
nungen mit den Abmessungen der Montagevorrichtungen.
2.1.1
HG 76342YA Top Hat Rail Casing
Figure 5
Dimensions HG 76342YA with Top Hat Rail Casing
