Software
English, Revision 03, Date: 07.02.2012
23
Afterwards it is possible to load the new Firmware by ASCII- Upload.
Using HyperTerminal you transmit the file in the following way:
1.
In the menu
transmission
choose the subitem
Send Textfile
. The follow-
ing window will open:
2.
Switch to the directory or to the data carrier in which the downloaded files are
stored and choose the corresponding firmware- file (e.g. 71450A11.10H).
3.
Click on
. The file will be transferred.
The Upload will be indicated by a sequence of dots and a terminating
O.
Subsequent-
ly call the main menu of the monitor programme by entering
and check the new ver-
sion of the Firmware with
. By pressing any key you will get back to the main menu.
Should the programming be not successful, the firmware will be started automatically
in the FlashLoader programme. After output of
P
and
R
it waits for a new ASCII- upload.