Gotie GPP-300, Manual

Page: 9 / 36

9
10) Descaling - working time of 50 minutes is not adjustable. The work
process cannot be paused
3. Setting of working hours and temperature
After the desired function is selected, it shall be confirmed by pressing the
START key. Digits in hour column will start blinking. By pressing keys < >
set the desired number of hours. Accept by pressing START and set the
number of minutes in the same way. After confirming with START , the
temperature column will flash; set the temperature with the buttons < > and
accept. Device will start to work.
4. During the work
1) Pause
To stop the device during operation, press the
Start button. Time counter
will be stopped. To resume work, press Start again.
2) Add the time and adjust the temperature in the midway
During the cooking/Baking/Roasting process, if you want to adjust the
cooking time
or temperature, the operation is as follows:
•
Press Setting key ,
until the “
Time-delay
” icon appers.
At this time,
the minute bit will flash. The minute bit can be adjusted by pressing
the selection key
< > (setting of hour bit is not available for delay
time function).
•
After the minute bit is adjusted, press the START key to enter the
setting of temperature. If you do not need to adjust the temperature,
please press the START key to directly start the work.
•
After the temperature is adjusted, press the START key to start the
work.
•
The time-delay function is not available for the descaling program.
After it is
completed, the system directly enters the END interface.
5. End of Work
1) After the program process is ended, “END” appears on the display
screen, and the
buzzer will beeps for 10 times, which indicates that the
cooking is completed. Afterwards, you can open the door to take out the
food or the system will automatically exit to the standby status five minutes
later.
2) After the program is over or in the standby state, for a pause or stop in