All Rights reserved, No Spreading without GOSUNCN Permission
45
AT Command Reference Guide of Module Product
ME3630
of supported <bm>s),(list of supported <ds>s),(list of supported <bfr>s)
<CR><LF>
<CR><LF>OK<CR><LF>
Parameter
<mode>- controls the processing of unsolicited result codes specified within this command
0
Buffer unsolicited result codes in the TA. If TA result code buffer is full, indications can be buffered in some other place or
the oldest indications may be discarded and replaced with the new received indications.
1
Discard indication and reject new received message unsolicited result codes when TA-TE link is reserved (e.g. in on-line
data mode). Otherwise forward them directly to the TE.
2
Buffer unsolicited result codes in the TA when TA-TE link is reserved (e.g. in on-line data mode) and flush them to the TE
after reservation. Otherwise forward them directly to the TE.
3
Forward unsolicited result codes directly to the TE. TA-TE link specific in band technique used to embed result codes and
data when TA is in on-line data mode. (when TA is in on-line data mode, it seems need a MT call to enable TA report to TE)
<mt> -sets the result code indication routing for SMS-DELIVERs (the rules for storing received SMs depend on its data coding
scheme, preferred memory storage (+CPMS) setting and this value; refer table 1;
0
No SMS-DELIVER indications are routed to the TE.
1
If SMS-DELIVER is stored into ME/TA, indication of the memory location is routed to the TE using unsolicited result code:
+CMTI: <mem>,<index>
2
SMS-DELIVERs (except class 2 messages and messages in the message waiting indication group (store message)) are
routed directly to the TE using unsolicited result code:
+CMT: [<alpha>],<length><pdu> (PDU mode enabled); or
+CMT: <oa>,[<alpha>],<scts>[,<tooa>,<fo>,<pid>,<dcs>,<sca>,<tosca>,<length>]<data> (text mode enabled)
If ME has its own display device then class 0 messages and messages in the message waiting indication group (discard message)
may be copied to both ME display and to TE. In this case, ME shall send the acknowledgement to the network.
Class 2 messages and messages in the message waiting indication group (store message) result in indication as defined in
<mt>=1.
3
Class 3 SMS-DELIVERs are routed directly to TE using unsolicited result codes defined in <mt>=2. Messages of other data
coding schemes result in indication as defined in <mt>=1.
<bm> -for CBMs (the rules for storing received CBMs depend on its data coding scheme, the setting of Select CBM Types
(+CSCB) and this value):
0
No CBM indications are routed to the TE.
2
New CBMs are routed directly to the TE using unsolicited result code:
+CBM: <length><pdu> (PDU mode enabled); or
+CBM: <sn>,<mid>,<dcs>,<page>,<pages><data> (text mode enabled)
If ME supports data coding groups which define special routing also for messages other than class 3 (e.g. (U)SIM specific
messages), ME may choose not to route messages of such data coding schemes into TE (indication of a stored CBM may be given as
defined in <bm>=1).
<ds>-for SMS-STATUS-REPORTs:
0
No SMS-STATUS-REPORTs are routed to the TE.
1
SMS-STATUS-REPORTs are routed to the TE using unsolicited result code:
+CDS: <length><pdu> (PDU mode enabled); or
