GMC-I Messtechnik GmbH
13
If there are no data available in the test instru-
ment when the menu item
Protocol
is called up,
the following message appears:
5.2
Automatic Report Storage
All test results are automatically allocated a consecutive ident number*
provided the
Autostore
function is active. After the safety test as well as
after the function test, a note is displayed indicating that the test data are
being stored.
When the SI module is deactivated, proceed as follows to activate the
Autostore function in the test instrument:
SECUTEST... test instrument:
Select the desired test at the function selector switch of the test in-
strument.
older versions SECUTEST 0701/0702S:
Set the function selector switch of the test instrument to the MENUE
position.
Move the cursor to
Setup
and confirm with
.
Move the cursor to
Configure
and confirm with
.
Move the cursor to
Autostore
: activate or deactivate the function with
.
* It consists of max. 24 digits. Counting starts with the first four digits in
each case, beginning with 0000.
