Gossen Metrawatt GmbH
79
17.2
Configuring Test Sequences
The test instrument includes integrated test sequences which are
preconfigured at the factory.
User-defined test sequences can be used as an alternative
(depending on test instrument model and features).
Status Upon Delivery / Initial State
Which integrated test sequences are assigned to rotary switch
positions
A1
to
A9
on your test instrument upon delivery or after a
test instrument reset depends on several factors: test instrument
type (SECUTEST ST... or SECULIFE ST...), selected features and
enabled extensions.
Furthermore, during initial startup you selected standard designa-
tions and deactivated unnecessary standards at the test instru-
ment. See “Test Standards / Configuration of Integrated Test
Sequences” on page 20.
Due to the great variety of possible combinations, a listing of stan-
dard assignments for rotary switch positions
A1
to
A9
would go
beyond the scope of this documentation. An example is included
in “Scope of Functions” on page 9.
Current assignments for your test instrument can be determined
by selecting the individual rotary switch positions.
Individual Customization of Integrated Test Sequences
You can change the integrated, preconfigured test sequences to
suit your needs:
You can adjust and change settings for the individual test
sequences, i.e. classification and sequence parameters, directly
at the test instrument. First familiarize yourself with the menu in
section 17.2.1 and then change any desired parameters (see sec-
tion 17.2.2).
User-Defined Test Sequences
As an alternative to the integrated test sequences and in accor-
dance with your own specific requirements, you can create indi-
vidual user-defined test sequences with IZYTRONIQ software at a
PC and transfer them to the test instrument (depending on test
instrument model and features). See section 17.2.3
17.2.1 Test Sequence Menu: View and Icons
Initial Test Sequence Page
The initial test sequence page displays all available settings and
provides access to them for editing.
Selection can be made between a tree view (structure view) and a
detail view (information about the DUT) for this view. The tree view
can be structured by location or customer (see screenshots
below).
SETUP rotary switch position > Setup Menu 1/3 > Measurements
2/4 > Initial Screen:
customer tree view
or
location tree view
or
detail
view
In the case of test instruments with feature E01 (touchscreen), it’s
also possible to switch between the views by means of “touch
click”, i.e. by briefly tapping the respective area.
Customer Tree View:
Location Tree View:
Detail View and Applied Part:
A1
Standard / Test Sequence
Protection Class
Classification
Meas. Type
Status Line
Customer Tree
Sequence
Connection Type
Parameters
Parameters
A1
Standard / Test Sequence
Connection Type
Protection Class
Classification
Meas. Type
Status Line
Location Tree
Sequence
Parameters
Parameters
A1
Connection Type
Protection Class
Meas. Type
Status Line
Applied Parts
Detail View
Standard / Test Sequence
Classification
Sequence
Parameters
Parameters
Summary of Contents for SECULIFE ST BASE 25
Page 111: ...Gossen Metrawatt GmbH 111 ...
