26
GOSSEN METRAWATT GMBH
Mechanical Design
Protection
housing: IP 40, connector jacks: IP 20
Dimensions
146 mm x 118 mm x 44 mm
Weight
approx. 450 gr. with batteries
15
Maintenance
Attention!
!
Disconnect the instrument from the measuring circuit before opening to
replace batteries or fuses!
15.1 Batteries
Make sure that no battery leakage has occurred before placing your instrument
into service for the first time, or after long periods of storage. Repeat this
inspection on a regular basis thereafter.
If battery leakage has occurred, clean the electrolyte from the device completely
and carefully with a dampened cloth and install new batteries before placing the
instrument back into service.
If the
symbol appears at the display, replace the batteries as soon as possible.
The instrument requires two 1.5 V batteries in accordance with IEC R 6 or
IEC LR 6.
Replacing the Batteries
Attention!
!
Disconnect the instrument from the measuring circuit at all poles before
opening the battery compartment!
➭
Fold the instrument closed.
➭
Insert a coin or a similar object into the slot between the housing and the
battery compartment cover and press down until the battery compartment
cover snaps open.
➭
Fold the instrument open as far as it will go and remove the battery
compartment cover.
➭
Insert two 1.5 V mignon batteries per IEC R6 or IEC LR6 into the battery
compartment, making sure they are poled in accordance with the symbols.
➭
Replace the battery compartment cover and press into position until it
audibly snaps into place.
➭
Please dispose of depleted batteries in an environmentally sound fashion!
15.2 Fuses
Eliminate the cause of overload after a fuse or breaker is tripped before placing
the instrument back into service!
