Gossen Metrawatt GmbH
10
Operating Overview – Connections, Keys, Rotary Switch, Symbols
4
Operating Overview – Connections, Keys, Rotary Switch, Symbols
1 Display (LCD) (see page 11 for significance of symbols)
2
MAN / AUTO
shift key for manual/automatic measuring range selection
Increase parameter values
Operating mode menu:
Select individual menu entries against direction of flow
3
ON / OFF | LIGHT
key for switching device and display illumination on and off
4
FUNC | ENTER
multifunction key
Operating mode menu:
Acknowledge entry (ENTER)
5
Increase measuring range or move decimal point to the right (MAN function)
6
Rotary switch
for measuring functions, (see page 13 for significance of symbols)
7 DAkkS calibration mark
8 Connector socket for ground
9 Connector socket for current measurement with automatic blocking
10 Connector socket for voltage, resistance, temperature, diode and
capacitance measurement with automatic blocking
11
DATA/MIN/MAX
Key for freezing, comparing and deleting measured value, and for Min/Max
Decrease values
Operating mode menu:
Select individual menu entries in direction of flow
12
MEASURE | SETUP
Key for switching back and forth between measuring and menu function
13
ZERO | ESC
Key for zero balancing
Operating mode menu:
Exit current menu level and
return to a higher level,
exit parameters configuration
without saving data
14
Decrease measuring range or move decimal point to the left (MAN function)
15 Connector for power pack (
METRAHIT PM XTRA / E
XTRA
only)
16 Infrared interface
1
3
4
16
5
6
9
*
chapter 5 ff.
13
12
10
2
14
8
Max. 1000 V!
11
15
7
