5
METRAFUSE FD PRO
Gossen Metrawatt GmbH
Symbols on the instrument and the included accessories:
3.3
Relevant Standards
The instrument has been manufactured and tested in accordance with the following safety
regulations:
Warning concerning a point of danger
(attention, observe documentation!)
Double insulation (protection category II)
European conformity marking
The device may not be disposed of with household trash.
Return and Disposal
DIN EN 60529
VDE 0470-1
Test instruments and test procedures
Degrees of protection provided by enclosures (IP code)
IEC 61010-1: 2010
DIN EN 61010-1: 2010
VDE 0411-1: 2010
Safety requirements for electrical equipment for
measurement, control and laboratory use.
Part 1: General requirements
IEC 61010-2-030: 2010
DIN EN 61010-2-030: 2010
VDE 0411-2-030: 2010
Safety requirements for electrical equipment for
measurement, control and laboratory use.
Part 2-030: Particular requirements for testing and
measuring circuits
IEC 61326-2-2: 2013
DIN EN 61326-2-2: 2013
VDE 0843-20-2-2: 2013
Electrical equipment for measurement, control and
laboratory use - EMC requirements.
Part 2-2: Particular requirements for portable test equipment
used in low-voltage distribution systems.
!
