Gossen MetraWatt MAVOMASTER Operating Instructions Manual Download Page 41 | Manualshive

Page: 41 / 56

Gossen MetraWatt MAVOMASTER Operating Instructions Manual Download Page 41

41

10.5 Calibration Certificates for MAVOPROBES

MAVOPROBES are intelligent measuring probes with comprehensive measured value processing and
serial data transmission. As a result, each measuring probe can be sent in separately for calibration.
Depending on how the meter is used, we recommend a calibration interval of either 12 or 24 months.

Factory Calibration Certificate

Traceability of illuminance, directly to the national standards of the PTB (German Federal
Institute of Physics and Metrology), is ensured by several standard calibration lamps
(Wi41/G), and traceability of UV-A irradiance at 365 nm by means of a reference meter.

▪

Illuminance or Luminance (H997B)

▪

UV-A Irradiance at 365 nm (H997U)

DAkkS Calibration Certificate

We ensure strictest possible industry standards for calibration and traceability with our
ISO/IEC/EN 17025 accredited calibration laboratory for illuminance and irradiance (D-K-
20315-01-00).

▪

Illumination (H997D)

▪

UV-A irradiance at 365 nm (H997U)

▪

Illumination and UV-A irradiance at 365 nm for ZfP/NDT (H997N)

«
...
39
40
41
42
43
...
»

Summary of Contents for MAVOMASTER

























































Reviews:

No comments