GMC-I Messtechnik GmbH
7
1
Applications
These instruments fulfills all requirements of applicable European
and national EC directives. We confirm this with the CE mark. The
relevant declaration of conformity can be obtained from GMC-I
Messtechnik GmbH.
The METRISO PRO insulation and resistance measuring instru-
ment allows for quick and efficient testing of protective measures
in accordance with DIN VDE 0100, ÖVE-EN 1 (Austria), SEV 1000
(Switzerland), and regulations specific to other countries as well.
The device is equipped with a microprocessor and complies with
IEC/EN 61557 / VDE 0413 regulations:
Part 1:
General requirements
Part 2:
Insulation resistance measuring instruments
Part 4:
Instruments for measuring resistance at earthing con-
ductors, protective conductors and equipotential bonding
Part 10:
Combined measuring equipment for testing, measuring
or monitoring protective measures
as well as requirements per VDE 0701-0702:
Repair, modification and testing of electrical devices
The test instrument is especially well suited for:
•
Systems setup
•
Initial start-up
•
Periodic testing
•
Troubleshooting in electrical systems
The following measurements and tests can be performed with the
insulation measuring instruments:
•
Insulation Resistance
•
Low-resistance
•
Voltage
The following can also be tested by using a shielded measure-
ment cable:
•
Floor covering electrostatic discharge capability
www.calcert.com
1.888.610.7664
0
5
10
15
20
25
30
