GMC-I Messtechnik GmbH
31
13.4
Optional Accessories (not included)
ISO Calibrator 1
(material no. M662A)
Calibration adapter for testing the accuracy of instru-
ments used for measuring insulation resistance and
low-resistance for test voltages of up to 1000 V (per
VDE 0413, parts 1, 2, 4 and 10).
KS-C
(material no. Z541F)
Cable set consisting of measurement cable and
shielded high-resistance measurement cable for mea-
surements in the G-
range
KS24
(material no. GTZ3201000R0001)
Cable set consisting of a 4 m long extension cable with
a permanently attached test probe at one end and a
contact protected socket at the other end, and 2 alli-
gator clips which can be plugged onto the test probe
1081 Probe
(material no. GTZ3196000R0001)
Triangular probe for floor measurements
per EN 1081, DIN VDE 0100-600 (standing surface insu-
lation)
Z550A
(material no. Z550A)
Optional plug-on measurement cable with measure-
ment key on the test probe and an additional key for
illuminating the measuring point, including shielded,
plug-in connector cable and test probe holder for
attachment to the carrying strap.
* DAkkS calibration laboratory for electrical quantities, registration no.
D-K-15080-01-01, accredited per DIN EN ISO/IEC 17025:2005
Accredited quantities: direct voltage, direct current value, direct current resistance,
alternating voltage, alternating current value, AC active power, AC apparent power, DC
power, capacitance, frequency and temperature
www.calcert.com
1.888.610.7664
0
5
10
15
20
25
30
