English
Clamp Multimeter METRACLIP 86
1.3.2
Measurement capacity exceeded (O.L)
The
O.L
(Over Load) symbol is displayed when the display capacity is exceeded.
1.4
THE TERMINALS
The terminals are used as follows:
1
2
Figure 5 : the terminals
2 THE KEYS
The keys of the keypad respond differently to short, long, and sustained presses.
The
,
and
keys provide new functions and allow the detection and
acquisition of parameters complementary to the usual elementary measurements.
- Each of these keys can be used independently of the others or in perfect
complementarity with them: this makes navigation simple and intuitive for
looking up all measurement results.
- It is possible, for example, to look up in turn the MAX, MIN, etc. values of the
RMS voltage alone, or else look up in turn all of the MAX (or MIN, or PEAK)
values of all power results (W, VA, var, etc.).
In this section, the
icon represents the possible positions of the switch for which
the key concerned has some action.
2.1
KEY
This key is used to:
store and look up the last values acquired specific to each function (V, A, Ω,
T°) according to the specific modes previously activated (MAX/MIN); the
present display is then maintained while the detection and acquisition of new
values continues;
Item
Function
1
Cold terminal
(COM)
2
Hot terminal
(+)
13
