30
GMC-I Messtechnik GmbH
4.7
Data Logger Display and Configuration
p r o g
L .o...... .G .G. r 10
3.
E
P
Rotating points
indicate that data
is being stored to
memory.
Display for Trigger Source Setting rel 1, rel 2, both
Number of accumulated
event windows
1 ... N, FULL
Point indicates that
a trigger event has
been recognized.
Maximum number
of storable trigger
events (N)
A blinking 0 indicates that too little
memory remains for the selected
setting. Recording cannot be
started.
If the data logger is not recording, the display blinks alternately: Logger / stop
Attention:
If the real-time clock has stopped, the display blinks alternately: Logger / time date
Operation of the data logger is interrupted if:
–
Memory is full and the memory mode is set to „once“
–
If a data logger parameter is changed (display: Logger / stop)
–
The data logger is started with
long
–
The data logger is stopped with
long
Attention: Memory is cleared when the data logger is started !
