2. Connect the sensor jack to the camera sensor socket, put the sensor
end in cotton diaper if you select the Bed-wetting Sensor detection.
* Specialists recommend the sensor is not suitable
for disposable panty diaper; and not suitable for
touching skin directly.
Motion Alarm Setup:
It refers to the alarm against various movements. If you slide the
alarm setting switch to Motion position, and select Sensitivity
switch. Afterward, the system enters the motion alarm mode. When
a movement is actually detected, the alarm begins until you press
the Eliminate Alarm Button. After less than 1 minute, the motion
alarm enters the next alarm circle.
Sound Alarm Setup:
It refers to the alarm against sound . If you slide the alarm setting
switch to Sound position, and select Sensitivity switch. Afterward,
the system enters the sound alarm mode. When the sound is actually
detected, the alarm begins until you press the Eliminate Alarm Button.
After less than 1 minute, the sound alarm enters the next alarm circle.
Sensor Alarm Setup:
It refers to the alarm against bedwetting. If you slide the alarm
setting switch to Sensor position, and select Sensitivity switch.
Connect the sensor to camera and diaper. Afterward, the system enters
the sensor alarm mode. When the bedwetting and water is actually
detected, the alarm begins until you press the Eliminate Alarm Button.
After less than 1 minute, the motion alarm enters the next alarm circle.
Off Alarm Setup:
It refers to the abandonment of the alarm function. If you slide the
alarm setting switch to Off position. The alarm function is disabled.
Note:
When the camera is powered on by dry batteries and directly plugged
in by the adapter, the alarm function fails to work. If this is the case,
please slide the power Off and back again to On, the alarm function
is successfully activated.
