LEGAL NOTICE
Copyright © 2014 Gosafe.
All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this
document in any form without the prior written permission of Gosafe is prohibited.
Other products and company names mentioned herein may be trademarks or trade names of their
respective owners.
SAFETY
Using connectors, ports, and buttons
Never force a connector into a port or apply excessive pressure to a button, because this may cause
damage that is not covered under the warranty. If the connector and port don’t join with reasonable ease,
they probably don’t match. Check for obstructions and make sure that the connector matches the port and
that you have positioned the connector correctly in relation to the port.
Operating temperature
G2P is designed to work in ambient temperatures between and stored in temperatures between -20
℃
to
+50
℃
. G2P can be damaged and battery life shortened if stored or operated outside of these temperature
ranges. Avoid exposing G2P to dramatic changes in temperature or humidity. When you’re using G2P or
charging the battery, it is normal for G2P to get warm.
Explosive atmospheres
Do not charge or use G2P in any area with a potentially explosive atmosphere, such as a fueling area, or in
areas where the air contains chemicals or particles (such as grain, dust, or metal powders). Obey all signs
and instructions.
Radio frequency interference
Observe signs and notices that prohibit or restrict the use of mobile phones (for example, in healthcare
facilities or blasting areas). Although G2P is designed, tested, and manufactured to comply with regulations
governing radio frequency emissions, such emissions from G2P can negatively affect the operation of other
electronic equipment, causing them to malfunction. Turn off G2P or use Airplane Mode to turn off the G2P
wireless transmitters when use is prohibited, such as while traveling in aircraft, or when asked to do so by
authorities.
Charging
Charge G2P with the included USB cable, or with other third-party cables and power adapters that are
compatible with USB 2.0, or power adapters compliant with one or more of the following standards: EN
301489-34, IEC 62684, YD/T 1591-2009, CNS 15285, ITU L.1000, or another applicable mobile phone power
adapter interoperability standard.
