OM-06823
ACCESSORIES
MAINTENANCE & REPAIR
PAGE E - 7
Slide the assembled rod and float out of the float
chamber. To remove the float from the rod, remove
one of the cotter pins (8) and slide the float off the
rod.
Air Release Valve Reassembly
Slide the float (7) onto the rod as shown in Figure 3,
and secure with the cotter pins (8). Slide the as
sembled rod and float into the float chamber (12).
Install the O‐ring (13) and secure the air release
adaptor (15) to the float chamber with the hard
ware (5 and 6).
Install the plunger pad (4) on the float rod and se
cure with the pin (9). The ends of the pin must not
protrude beyond the O.D. Of the plunger pad on
either side.
Replace the gasket (1) and install the valve seat (2)
into the float chamber. Connect the return tubing to
the sump valve.
Summary of Contents for GRP33-08A
Page 2: ......
