300095
• If you have a tumble dryer of the same dimensions, you can place
it on top of the washing machine.
To ensure correct operation of the appliance, water
pressure inlet must be between 0,05 and 0,8 MPa.
Minimum water pressure can be established by measuring
the quantity of poured out water. 3 litres of water must be
poured out from completely opened tap in 15 seconds.
• Take the water inlet hose from the drum and attach the inlet hose
angle extension (1) to the washing machine by screwing it onto
the provided thread (certain models only).
• Insert the gasket with a
fi
lter net into the straight inlet hose
attachment nut (2) and screw the nut onto the water tap. (With
some models, the gasket with
fi
lter net is already
fi
tted and any
additional
fi
tting into the nut on the straight attachment is not
required).
• If your model has connections for both hot and cold water, then
connect one hose to the cold water supply (blue wing nut or blue
mark on the hose) and the other one to the hot water supply (red
wing nut or red mark on the hose), as indicated on the back wall of
the appliance (letters C and H) (C - cold; H – hot).
The inlet hose should be tightened manually,
fi
rmly enough
to prevent any leaks. After tightening the hose, check for
any leaks.
Use of pliers, wrenches, or other similar tools is not
allowed when installing the hose, as these tools can
damage the nut thread.
Partial Aqua-stop (water stop system)
In case of damage on the interior pipe, leaking is prevented by
automatic closing system which stops water inlet to the machine. In
such cases display A turns red.
Inlet pipe must be replaced.
Complete Aqua-stop
(certain models only)
In case of damage on the interior pipe, leaking is prevented by
automatic closing system which stops water inlet to the machine.
Security system also detects whether there is any water leakage
within the interior of the machine. In such cases washing is
suspended, machine switches on the pump and signals error.
Do not immerse the Aqua-stop system inlet pipe into the
water, because it contains the electric valve!
Water inlet connection
6
