Gorenje WA61052 Instructions For Use Manual Download Page 4

141344

•  Be sure to remove transport brackets prior 

fi

 rst use of the appliance. Attempted operation of the 

blocked machine may result in irreparable damage which is not covered by the manufacturer’s 
warranty!

•  When connecting your washing machine to water supply, be sure to use brand new water inlet 

hose and appropriate sealing gaskets (attached).

•  Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be 

damaged if frozen.

•  Install the washing machine in a perfectly horizontal position, on solid 

fl

 at concrete 

fl

 oor.

•  Follow the instructions for correct installation and water and mains connections.
•  Never immerse the end of the drain hose into the draining water.
•  Prior starting the washing cycle lock the door by pressing them at the designed spot.
•  Door may not be open during the washing cycle.
•  Use only detergents and softeners for machine wash. Manufacturer may not assume 

responsibility for any damage and eventual discoloring of gaskets and plastic components as a 
consequence of incorrect use of bleach and/or coloring agents.

•  For removal of lime residues use such agents with added anti-corrosion agents. Follow the 

manufacturer’s instructions. Finish the lime removal by multiple rinsing to remove completely 
eventual acid residues.

•  Never use detergents containing solvents, since there is a danger of creating toxic gasses which 

may damage the machine and result in ignition or explosion. 

•  Upon completion of washing operation close the water faucet.
•  Before any transport block the machine by inserting at least one transport blocking rod. Prior this 

operation disconnect the appliance from the mains power!

•  Rating plate with basic information is located above the opening of the machine.
•  The warranty shall not apply to consumables (bulbs), minor discoloration or deviations of color, 

increased noise level as a consequence of appliance age, which does not affect appliance 
functionality, and aesthetical de

fi

 ciencies which do not affect appliance functionality or safety.

 Before connecting the appliance read these instructions carefully. Repairing the failure 

arising from inappropriate connections or use of the appliance is not covered by the 
guarantee.

The symbol on the product or on its packaging indicates that this product may not 
be treated as household waste. Instead it shall be handed over to the applicable 
collection point for the recycling of electrical and electronic equipment. By 
ensuring this product is disposed of correctly, you will help prevent potential 

negative consequences for the environment and human health, which could 
otherwise be caused by inappropriate waste handling of thisproduct. For more 
detailed information about recycling of this product, please contact your local city 
of

fi

 ce, your household waste disposal service or the shop where you purchased the 

product.

4

Cautions

Summary of Contents for WA61052

























Reviews: