239839
within
fi
ve minutes after turning on the machine, the display will
be automatically turned off to save energy.
The display will turn on again when you rotate the program
selector dial or press any button.
If no action is taken after the end of the program, the display will
also turn off after
fi
ve minutes.
Low water temperature, low network voltage, and
smaller loads of laundry may extend the washing time;
the time indicated on the display is constantly adjusted
to account for such conditions.
LOW POWER MODE
P o
= weighted power in ‘off mode’ [W]
0,07
P l
= weighted power in the ‘left on mode’ [W]
1,50
T l
= time in ‘left on mode’ [min]
10,0
Delayed start
Press the (B) button; the time “00:00” will be indicated on the
display (G). Each time the button is pressed again, the time on
the display will be increased by one hour (maximum delay is 23
hours). After the time has been selected, the LED over the button
lights up (and remains lit). If no other button is pressed in the
following 5 seconds, program duration is indicated on the display.
The function is activated when the START (F) button is pressed.
Time is decreased by minutes. When the count-down is over, the
washing program starts automatically.
• To interrupt or change the delayed start setting, press the
START / PAUSE button.
• To change the delay time, select a new time by pressing the
(B) button. Press START to resume the count-down. To quickly
interrupt the delayed start, press the (B) button and hold it for
three seconds. Press the START button to resume the program.
Spinning speed (rpm) / Pump stop
By pressing the (C) button, you can decrease the spinning speed
(in rounds per minute) to “0”. After pressing the button for the
fi
rst time, the optimum rpm setting for the selected program is
indicated. By each subsequent press on the button, the spinning
speed is decreased. The last selection is “pump stop”, which
means that laundry remains soaked in the last rinsing water. Use
this function to prevent creasing when you are not able to take
the laundry out of the washing machine immediately after the
washing cycle is over. This function is particularly appropriate for
synthetics
and delicate laundry
. Use of this function is not
recommended with wool
and manual washing
.
12