Gorenje VCK 2000 EHC Cyclonic, Instruction Manual

Page: 25 / 56

25
SPILLING RUBBISH FROM THE DUST COMPARTMENT SUBASSEMBLY
•
Always operate the cleaner with the dust compartment subassembly whole installed.
•
If you forget to attach HEPA and filter or attach its in the wrong manner, the dust compartment
subassembly may not rinse.
1.
After removing the flexible tube, handhold handle and press the locking button.
2. Carry the dust compartment subassembly.
3. Carry away the dust-glass cap and Spill rubbish
4. Spill rubbish and fix the dust compartment subassembly.
5. Replace the dust compartment subassembly until it is locked.
CLEANING AND CHANGING FILTER OR HEPA
•
Filter for air-inlet should be cleaned at least twice a year or when it becomes visible solid.
•
Clean HEPA for air-let when you find it is filled in.
•
HEPA for air-inlet and filter for air-outlet are changed.
•
Always operate the cleaner with filters and HEPA installed.
•
Otherwise, reduced suction or motor damage may be result.
•
Disconnect from electrical outlet, before cleaning filter.
•
Do not use a washing machine to rinse filter.
•
Do not use hair drier to dry it.
1.
After opening the dust compartment subassembly, rotate HEPA until it is unlocked
2. Remove HEPA.
3. Rinse filter and HEPA in lukewarm water and dry Filter and HEPA completely. (HEPA is rinsed by
brush.)
4. Put the filter into the Grille-Filter and rotate HEPA or change new HEPA, then put them back.
1
2
3
1
2
4