Gorenje SGT 2400 BW, Instruction Manual, Page: 40 / 120

40
VERTICAL STEAMING
This function provides steam to remove wrinkles on delicate garments in
hanging position, hanging curtains or other hanging fabric.
Note:
1. Do not apply steam on any clothes or fabrics that are being worn by
human or pets. Temperature of steam is very high.
2. Maintain a distance of a few centimeters from delicate fabric (Synthetics,
silk, velvet, etc.), otherwise the fabric could be damaged.
DRY IRONING
1. Unwind and straighten the power cord and supply cord.
2. Connect the appliance to a suitable mains supply outlet.
3. “Beep” sound would be heard and the LCD would display all logos for a Second then turn off.
4. Press the power On/Off button
5. The medium steam level ( ) and (
) Medium hard water level indicator will display in the
LCD with a beep sound.
6. The will blink to indicate; the base unit is heating up or cooling down.
7. Turn the Temperature Dial on the iron in clockwise direction; select ‘

’ (1 dot), ‘

’ (2 dots) or ‘

’ (3
dots) according to the recommendation of garment label.
8. Pilot Light glow until the required temperature for the iron unit is reached.
9. Select the dry iron indicator ( ) by press the “-“LCD control button, a beep sound would be heard
for each LCD control button pressing.
10. If the steam generator has the steam pressure, the pressure indicator will display in the LCD.
11. Pilot Light goes off when the required temperature for the iron unit is reached.
12. The appliance is ready to use.
13. Turn the Temperature Dial on the iron unit in anti-clockwise direction to “Min” and the iron is
switched off.
14. Press the Power On/Off switch, the base console will switch to “Standby mode” with a beep sound.
15. Disconnect the power cord from mains supply outlet.
16. When the appliance gets cool completely, store it in a safe place.
AUTO SHUT-OFF
Auto shut off system will activate if appliance is not used over 10 minutes. LCD display
back light goes off with a beep sound and the pause icon will blink. When this occurs,
press the Power ON/OFF button once, the appliance will switch ON immediately. Wait
about one and half minutes for the appliance to heat up to the temperature set before