Gorenje SGT 2400 BW, Instruction Manual, Page: 38 / 120

38
OPERATING INFORMATION
The appliance has a high technology low-pressure steam chamber that can be heated up in short time.
Water is converted to steam vapor in the chamber and transported to the iron unit through the supply
cord.
HOW TO FILL WATER
The appliance has an electronic system to monitoring the water level. When the water level is lower
than the pre-set value, the
icon will blink with beep sound until the water is re-filled.
1. Disconnect the power cord from mains supply outlet.
2. Press the water tank release button and pull out the water tank.
3. Open the water inlet cover.
4. Fill water through the water inlet hole up to MAX level marked on the side of water tank.
5. Close the water inlet cover.
6. Replace the water tank in its place.
FIRST TIME IRONING
1. Remove any protective films or sticker from the soleplate and the cabinet, if any.
2. Unwind and straighten the power cord and supply cord.
3. Fill the water tank with tap water. (See HOW TO FILL WATER)
4. Connect the appliance to a suitable mains supply outlet.
5. “Beep” sound would be heard and the LCD would display all logos for a Second then turn off.
6. Press the power On/Off button
7. The medium steam level ( ) and medium hard water level (
) indicators will display in the
LCD with a beep sound.
HOW TO USE THE CABLE SUPPORT
1. Unwind and straighten the supply cord.
2. Install the cable support showing.
3. Place the supply cord onto the hook
of the cable support showing.