Gorenje SGH2400BB SUPREME, Instruction Manual

Page: 56 / 206

55
hot! There is high pressure of steam in the
boiler and it can hurt you!
1. Press the on/off button to switch off the steam
generator and remove the plug from the wall
socket.
2.
Wait until the steam generator cools down
completely!
3. Remove the water tank from the steam
generator.
4. Place the steam generator onto a stable table
with the EASY DECALC knob pointing down and
projecting beyond the edge of the table;
alternatively, take the steam generator to a sink.
IMPORTANT: If the steam starts to emerge
when you turn the knob anti-clockwise, this
is an indication that the steam generator is
not cooled enough. In such case,
immediately tighten the knob back in the
clockwise direction and wait until the
generator cools down completely!
5. Hold a cup under the EASY DECALC knob.
Turn the EASY DECALC knob anti-clockwise
and let the water with scale particles flow into
the cup.
When no more water comes out of the steam
generator, replace the EASY DECALC knob.
Turn the knob clockwise to fasten it.
You can now prepare the steam generator for
use again.
Cleaning the soleplate
Clean the soleplate regularly to remove stains
from the soleplate.
To maintain smooth gliding of your soleplate, it
is recommended to clean it regularly (once every
2 months). You can do so by heating up the iron
and moving the soleplate over a moist fabric.
Descaling the soleplate: if you do not descale
your steam generator regularly, scale may build
up upon the soleplate. To remove the scales,
follow the instructions below:
1. Descale the steam generator before cleaning
the soleplate (see EASY DECALC of steam
generator).
2. Tilt the steam generator and pour 500 ml
distilled water into the opening. Reinsert the