EN
OPERATING INSTRUCTION
1. Insert the plug into the suitable wall outlet.
•
Never use the unit in place where is not even, make sure there is nothing flammable or
easy deform object within 1 meter (36 inches).
•
Insert the plug after setting the thermostat to “MIN” position and setting the power
selected switches to “0” position.
•
Do not cover the unit.
•
The heater is suitable for operation on an A.C. electricity supply having the same
voltage as that show on its rating label.
2. Rotate power switch to the "III" position then turn thermostat to the "MAX" position, at this
moment, the unit begins to work, when the temperature rises to which you are satisfied with,
slowly turn the thermostat counter clockwise until the indicating light of the key for power choice
is out, and the room temperature thus can keep constant. If you want to raise or lower the room
temperature, you can make another regulation: Turn the thermostat clockwise to raise the
temperature and counterclockwise to lower it, or press only one shift of power switches to “ON”
position.
3. Turbo function
Press the switch to “ON” position, the fan heater begins to work separately and used as a fan
heater. The temperature in the room will rise rapidly.
NOTES:
•
The pilot lamp will be on only if the temperature is below the setting value of the
thermostat.
•
The room must be sealed in good condition, if not, it will not make good result because
of the influx of heat.
•
The outlets of the control chamber must be kept ventilative, if not, undue move of the
thermostat may occur.
•
After use, turn the power switch to the “0” position first, then turn the thermostat to the
“MIN” position, and pull out the power supply plug.
SAFETY FEATURES
Thermal cut-off: This heater includes a thermal cut-off that shuts the heater off if it overheats
due to abnormal conditions. If this occurs, turn the heater off, unplug it, and inspect and remove
any objects on or adjacent to the heater. Allow it to cool for a few minutes, and then plug it
back in and resume normal operation.
Tip-over switch: This heater includes a safety tip-over protection feature that will shut the
heater off in case it is tipped over. If, at any time, the heater tips over, please put the heater
back in the upright position. The heater will resume its normal operation.
CLEANING AND MAINTENANCE INSTRUCTIONS
1. The electric heater should be cleaned regularly to wipe out the dust on the surface of flanges.
As this may influence the radiating efficiency.
2. Disconnect electricity supply and allow radiator to cool, wipe out dust with a soft damp cloth.
Do not use detergent or abrasives.
3. Do not scrap the surfaces of flanges with sharp hard tools, to avoid surfaces getting rusty,
because of damage of the paint coat.