EN
ASSEMBLY INSTRUCTIONS
Unpack your heater and find the wheel-holding plate and butterfly nuts between the fins
assemblies .
1. Make sure the heater is unplugged and in the "0" position.
2. TURN THE HEATER UPSIDE DOWN.
3. Attach the wheel-holding plates onto the heater as Fig.1
shows. The U plate is fixed between the last tow fins and the other one is fixed under metal
control box.
Fix the castors to the vertical axis of both the wheel holding plates.
4. Insert the butterfly nuts and tighten them securely.
5. TURN THE HEATER UPRIGHT. Your heater is now ready to use.
WARNING: Risk of fire. Do not operate heater without wheel assemblies attached.
Operate heater in upright position only (wheels on bottom, controls on top). Any other
position could create a hazardous situation. Ensure that the surface beneath the heater
is clean and free of any obstructions. It is not recommended that this heater be placed
on high-pile carpeting or any other surface that impedes the flow of air underneath the
heater.
This heater include an a visual alarm to warn that parts of the heater are getting
excessively hot. If the alarm flashes, immediately turn the heater off and inspect for any
objects on or adjacent to the heater that may cause high temperatures. DO NOT
OPERATE THE HEATER WITH THE ALARM FLASHING.