Gorenje KC621USC, Instructions For Use, Installation, And Connection

Page: 14 / 24

467522
What happened...? Possible cause What to do?
The burners will not burn
The fl ame is uneven / unstable Flame is uneven due to a
wrong gas power setting. Have an expert check he gas
pipeline!
The fl ame from the burners
suddenly changes Wrongly assembled parts of the
kitchen hob Assemble the burner correctly.
Burner ignition takes more time Wrongly assembled parts of the
kitchen hob
Assemble the burner correctly.
The fl ame is extinguished
shortly after ignition Knob pressed too short or to
weakly. Keep the knob depressed for
a longer period of time. Before
releasing it, pres it harder.
The grid has discolored in the
burner area? This is a commonplace
phenomenon resulting from
high temperature Clean the grid with a metal care
detergent.
Electric power supply in general
is interrupted? The fuse may be blown. Check the fuse in the fuse box
and replace it if it is blown.
Electric ignition of the burners
no longer works? There are food or detergent
residues between the spark
plug and the burner. Open and carefully clean the
opening between the spark plug
and the burner.
If the burner cover looks
unappealing... Regular dirt Clean the burner covers with a
metal care detergent.
If the problem persists despite observing the instructions above, call
an authorized service technician. Elimination of any errors or warranty
claims that resulted from improper connection or use of the appliance
is not covered by our warranty. In such cases, the costs of repair are
borne by the user.
Important warnings
• Installation of the appliance into a kitchen worktop and its connection to the power mains may only be
performed by an adequately qualifi ed technician.
• Veneer or other fi nish of the piece of kitchen furniture into which the hob is to be built in should be
treated with heat resistant glue (100°C); otherwise, the worktop fi nish may be discolored or deformed.
• Cooking hob is dimensioned to be built into the worktop over a piece of kitchen furniture, with a width
of 600 mm or more.
• After installation, the front two fastening elements should be freely accessible from below.
• The kitchen furniture element underneath the hob should not be fi tted with a drawer. If the kitchen
furniture element as a horizontal partition wall, it should be installed no less than 10 centimeters from
the lower surface of the worktop. The space between the partition wall and the hob must be empty; no
objects should be placed into that gap.
• Hanging, or wall-mounted kitchen elements should be installed high enough not to interfere with the
work process.
• The distance between the cooking hob and the kitchen hood should be no less than indicated in the
instructions for kitchen hood installation. The minimum distance is 650 mm.
• The distance between the appliance edge and the adjacent tall kitchen furniture element should
amount to no less than 100 mm.
14
Installation