background image

Installation instructions

33.74-35.71 (857-

 907)

20.47 (520)

21.89 (556)

27.56-31.30* (700-800*)

2.14 (54)

7.70 (196)

17.50 (444)

22.56 (573)

23.79 (604)

4.92-6.89 (125-175)

2.16 (55)

1.20 (31)

4.21 (107)

48.58 (1234)

29.13 (740)

27.95 (710)

29.92-33.07* (760-840*)

50.87* (1292*)

Integrated door panel with slide function installed, which means the
integrated door panel slides upward when the dishwasher is opened.

Door length

*

Nominal dimensions. Actual measurements may vary.

'' (mm)

It is important that you read through and follow the instruc-
tions and directions below. Conduct installation and connec-
tion in accordance with the separate installation instructions.

Important safety instructions

Connections to electricity, water, and drainage must be
performed by a qualified professional.

Always follow applicable regulations for water, drainage,
and electricity.

Take care during installation! Wear protective gloves!
There must always be two people!

Place a drip tray on the floor beneath the dishwasher to
prevent damage from any water leaks.

Before screwing the dishwasher into place, test the
dishwasher by running the Rinse program. Check that
the dishwasher fills with water and drains. Also check
that none of the connections leak.

WARNING!

Turn off the water supply when installing the dishwasher!

WARNING!

The plug must be disconnected or power to the outlet
turned off while installing the dishwasher!

Setup

The recess and connection dimensions are included in
the separate installation instructions. Check that all di-
mensions are correct before starting the installation.
Note that the height of the integrated door panel can be
adjusted to match other fittings.

The electrical and water supplies should enter through
the area indicated by the shading on the illustration.

 33.86-35.83
(860-910)

24 (610)

24 (610)

4.95 (125)

1.5 (38)

3.7 (94)

'' (mm)

Make sure the area on which the dishwasher is to be
installed is firm. Adjust the adjustable feet so that the
dishwasher is level.

Check that the machine is installed such that the door
opens freely, otherwise door lock functionality may be
disrupted.

20

Summary of Contents for GV67261XXLCUS

























Reviews: