Action
Possible causes
Problem
Clean the coarse and fine
filters.
The filters are blocked.
Water remains in the
dishwasher.
Check that the filter handle
is locked in the stop
position. The handle should
point straight out from the
dishwasher.
The filters are not fitted
correctly.
Clean the drainage pump.
See the chapter Care and
cleaning.
Debris in the drainage
pump.
Check that the coloured stop
on the right in the bottom
drain is in place. See the
chapter Care and cleaning.
Drainage pump stop
missing.
Check that the hose is free
from kinks and sharp bends.
Kink in drainage hose.
Disconnect the drainage
hose where it connects to
the sink unit's water trap.
Check that no debris has
fastened and that the
connection has an inner
diameter of at least 14 mm.
Blocked drainage hose.
26
