Gorenje GV65160XXLCUS, Operating Instructions Manual

Page: 8 / 24

NOTE!
Optimal washing and drying results are achieved by using
normal dishwasher detergent together with separately
dispensed rinse aid and salt.
The main power switch
Press and hold the main power switch until the display turns
on. Also check that the water supply valve is on.
PROGRAMS - Select a program
Select a program to suit the type of dishes and how dirty
they are.
Press the Program selector one or more times until the de-
sired program symbol is activated.
Auto wash
The dishwasher can measure how dirty the dishes are and
adjust water consumption and temperature accordingly.
When newly installed, the program needs to be run five
times before it is fully adapted and can provide the best re-
sults.
Intensive wash
Program for heavily soiled dishes, such as pans, casserole
dishes, and oven dishes. If these dishes do not completely
fill the dishwasher, you can add plates and other dishes that
can withstand a Heavy wash to fill out the load.
Normal wash
This program is recommended for daily, regular, or typical
use to completely wash a full load of normally soiled dishes,
such as plates, serving dishes, cups, and glasses.
Quick wash
This program is used for glasses and porcelain that is
lightly soiled, such as coffee cups.
In combination with SpeedWash, a shorter program is
achieved (15 minutes).
Rinse
Use to rinse dishes while you wait for the dishwasher to
become fully loaded.
EXTRA - Selecting Options
To select an option, press one of the option buttons until
the option is activated. The available options vary between
programs and some options cannot be combined (available
options glow dimly).
SpeedWash
This option shortens the program time, but uses more ener-
gy and water.
Extra dry
If you activate this option, a higher temperature in the final
rinse improves the drying results. Energy consumption in-
creases slightly.
Half load
This option adapts the dishwashing program to a half-filled
dishwasher, using less energy and water.
Delayed start
When you select Delayed start, the dishwasher will start 1-
24 hours after you close the door.
1. Press the button once to activate Delayed start. Press
the button several times – or hold it in – to set the de-
sired number of hours.
2. Close the door and the dishwasher display counts down
1 hour at a time and starts after the selected delay.
If you want to cancel the Delayed start option, open the door
and press and hold the main power switch until the display
turns off.
Starting the dishwasher
Press and hold the Program selector until it starts to flash.
Close the door within four seconds to start the dishwasher.
TIME - Time remaining
Once you have chosen a program and options, the time the
program took when last used is displayed.
Stopping or changing a program
If you want to change the program after starting the dish-
washer, open the door then press and hold the main power
switch until the display turns off. Add more detergent if the
lid of the detergent dispenser has opened. Then press the
main power switch again to choose a new program.
WARNING!
The dishwasher door must not be open while a program
is in progress. If the door is open, "STR" is shown on the
display. If you want the dishwashing program to continue,
press the Program selector and close the door immediate-
ly. If you want to cancel the dishwashing program, press
and hold the main power switch until the display turns off.
8