NOTE!
When the drainage hose is routed to a connection nipple
on the sink unit's water trap (see illustration 1), please
note that the hose must be attached at the same height
as the underside of the sink unit, otherwise dishwater from
the sink may flow back into the dishwasher. For other
connection alternatives, see illustrations 2 and 3.
1
2
3
Connection to water supply
Use only the supply hose provided with the dishwasher. Do
not re-use old hoses or other spare supply hoses.
The supply pipe must be fitted with a stopcock. The stopcock
must be easily accessible, so that the water can be shut off
if the dishwasher has to be moved.
Once the installation is complete, the stopcock should be
opened to allow the pressure to settle for a while and to
check that all connections are tight.
Connect to cold water...
If you use oil or electricity to heat your home.
Connect to hot water (max. 70 °C)...
If you use district heating, solar power or geothermal power
to heat your home. Choosing a hot water connection cuts
programme times and reduces the dishwasher's electricity
consumption.
Electrical connection
Information about the electrical connection can be found on
the serial number plate. This specification must match the
electricity supply.
The dishwasher must be connected to an earthed socket.
The electric wall socket must be placed outside of the
installation area to be easily accessible after installing the
dishwasher. Do not use an extension cord!
NOTE!
Repairs and maintenance relating to safety or
performance must be carried out by a qualified
professional.
Screwing the dishwasher into place
2x
=
=
After fastening the machine, check that the front feet still
touch the floor.
Adjusting the plinth
The dishwasher is supplied with a toe kick. Depending on
the recess height and plinth depth the height of the toe kick
can be adjusted. The table shows which toe kick height to
use.
Recess height
Plinth depth
Plinth depth (mm)
Recess height
(mm)
90<
80
70
60
50
90
-
-
-
-
820
100
90
90
-
-
830
110
100
100
90
90
840
120
110
110
100
100
850
120
120
120
110
110
860
120
120
120
120
120
870
Use a sharp knife to score the front and the back of the toe
kick at the desired height. Now carefully separate the toe
kick into the right height.
19
Summary of Contents for GU64160
Page 22: ...Your notes 22...
Page 23: ...Your notes 23...