Gorenje GTN31X, Instruction Manual, Page: 9 / 70

GB 11
Important matters
• This appliance should only be connected up by a registered installer!
• Do not use the teppan yaki if it is damaged.
•
Never open the casing of the teppan yaki. This may only be done by
a qualified installer.
• Ensure that the flexes of electrical appliances, e.g. a mixer, do not
touch the hot grill zone.
• Always disconnect the appliance from the electronic power supply
before any repair work is carried out. You do this by unplugging the
appliance, by switching off the fuse(s) or, if you have a permanent
connection, by setting the switch on the power supply lead to zero.
• Do not use a teppan yaki that is broken or contains cracks. Switch
off the appliance immediately, unplug it from the power supply to
avoid any electrical shocks and call the service department.
• The connection must comply with all national and local regulations.
• The appliance must always be earthed.
•
The connection cable should hang unobstructed and not run the risk
of being hit by a drawer.
• Ensure that the teppan yaki is built into a flat worktop.
•
The walls and the worktop surrounding the appliance should be
heat-resistant to at least 85 °C.
• The warranty does not cover any damage resulting from a wrong
connection, faulty assembly or improper use.
• The cables connecting the teppan yaki to the control box should not
be bent, twisted or pressed down by an object. Ensure that this does
not happen when unpacking and installing the teppan yaki.
Electrical connection
230V - 50Hz - 2500 W
• The electrical connection must comply with national and local
regulations.
• Wall socket and plug must be accessible at all times.
•
If you want to make a fixed connection, ensure that a multi-pole
switch with a distance between contacts of 3 mm is installed in the
supply cable.
• Do not use an adapter or an extension lead to connect the device to
the electrical mains. Safe use of the device cannot be guaranteed
with these accessories.
INSTALLATION