Before each operation, disconnect the appliance from the
electrical mains and allow it to cool down.
• Wash enameled parts with lukewarm water and
detergent: do not use abrasive products which might
damage them.
•
Wash the flame caps and burner caps often with boiling
water and detergent, taking care to remove all deposits.
•
We strongly advise you not to use sourcing pads, steel
wool or acids for cleaning.
•
Clean the hob regularly with a soft cloth wet with
lukewarm water and a little liquid detergent.
•
Do not use the following products:
- household detergents or bleaches;
- Soaped scouring pads not suitable for non-stick utensil;
- Steel wool scouring pads;
•
Automatic burner ignition is provided (when installed)
by a ceramic “plug”and a metal electrode. Periodically
clean these parts of the hob thoroughly. In addition, to
avoid ignition difficulties, check that the cavities in the
burner are not obstructed.
•
To remove deposits from the burner cavities, remove
the cap and separate the two parts (see dfiagram).
Affter cfleanfing, put the two parts back together.
After washing, replace the hob pan stands, checking
that they are correctly positioned.
• Have the condition and efficiency of the gas pipe and
the pressure regulator (if installed) checked periodically.
If anomalies are found, do not request repairs but have
the fault part replaced.
•
To ensure good performance and safety, the gas
regulator caps must be greased periodically.
General cleaninghob
CLeAnInG AnD MAIntenAnCe
6
!
... Before each operation, disconnect the appliance from the
electrical mains and allow it to cool down.
