Troubleshooting
Action
Error messages
Clear the drainage pump. See the chapter
. If
the problem persists, contact your nearest service centre.
Overfilling water
F10
See "Water remains in the dishwasher" under "Problem" in the
table below. If the problem persists, contact your nearest service
centre.
Water outlet fault
F11
Check that the water tap is on. Check that the outer filter on the
inlet hose is not blocked. See
Unblocking the inlet hose filter
in
the chapter
. If the problem persists, contact
your nearest service centre.
Water inlet fault
F12
Turn off the water tap and contact your nearest service centre.
Inlet valve leakage
F40
Turn off the water tap. Remove the plug from the wall socket and
contact your nearest service centre.
Heater fault 1
F41
Turn off the water tap and contact your nearest service centre.
Overfilling water
F54
To avoid water leakage outside the dishwasher, do not remove
the plug from the wall socket until the water tap on the supply line
has been turned off!
Check that the water tap is on. Check that the outer filter on the
inlet hose is not blocked. See
Unblocking the inlet hose filter
in
the chapter
. If the problem persists, contact
your nearest service centre.
Water inlet fault
F67
Press any button to clear the error message.
Action
Possible causes
Problem
Wait a moment then try again.
You have pressed the control
panel too soon after closing the
door.
The control panel does not react
when pressed.
The control panel only reacts to
use when the door is closed.
The door is open.
See the chapter
.
Child lock or Automatic child
lock is activated.
Clean with a dry or slightly
damp cloth.
Dirt on the control panel.
Check that the baskets are cor-
rectly positioned horizontally.
The baskets are not correctly
positioned.
Cannot close door.
Check that the dishes are not
blocking the baskets from slid-
ing properly into place.
Press
. The display starts
counting down.
has not been pressed.
The dishwasher does not start.
Check.
The door is not properly closed.
25
