Remaining time
Once you have chosen a program and options, the time the program took when last used is displayed.
Once you have started the dishwasher, the display shows the remaining program time. The remaining
time is updated during the drying phase.
This may differ somewhat from time to time depending on the temperature of the water supply, the
amount of dishes, the ambient temperature and other factors.
If you want to load more dishes
1)
Press and hold
for three seconds to pause the program. Open the door. Add the dishes and close
the door. Press
.
Power failure
If the dishwasher is turned off due to a power failure when a dishwashing program is running, the
program continues when power is restored. If the power is cut during drying, the program is interrupted.
If the door is open for more than 2 minutes during drying, the program is interrupted.
Once the program has finished
Once the program has finished, "End" appears on the display.
At the end of the program one short signal will sound. Chapter
describes how to change this
function.
The dishwasher switches off automatically after the program ends. Shut off the water tap after each
use.
The best drying results
•
Fully load the dishwasher.
•
Angle dishes with hollows, such as cups, so that the rinse water will run off. This is also important
for plastic items.
•
Top up with rinse aid or increase the rinse aid dosage setting.
•
Open the door a little once the program has finished.
•
Allow the dishes to cool before unloading the dishwasher.
Unloading the dishwasher
Hot porcelain is more fragile. Leave the dishes to cool in the dishwasher before unloading them.
Unload the lower basket first to avoid any water drops from the upper basket falling onto the dishes
in the lower basket.
1)
You should not load more dishes if the lid of the detergent dispenser has been opened.
17
